Foxtech Argus V3, Руководство пользователя

Страница: 11 / 23

Read data
There is a TF card slot for storing data on the side of Argus V3. Insert the original TF
card into each card slot according to the number, and then turn on the power supply
to control the host to record data.
（Note: Windows 7 users should wait patiently for the computer to read the
driver）
Read 5 camera data drive letters, and correspond to the drive letter data according to
the lens number.
Formatting the drive letter and inserting it into the host computer does not
affect the data record.
Working condition
DJI UAV can support psdk installation through SKYPORT adapter ring. Normal UAV
flight control needs to support level signal or PWM signal trigger.
PWM trigger signal specification:
Trigger: 1900ms
Reset: 1050ms
Signal duration: 500ms-1000ms
Level signal specification:
Trigger: falling edge / rising edge(3.3-0v)
Signal duration: ≥ 10ms
USB connection to MS CCS Pro
Please make sure that the control software MS CCS Pro is installed on the PC side and
then carry out the following operations.
Data line access to parameter adjustment port -- running MS CCS Pro -- camera
setting options -- connecting equipment
It is not necessary to connect the power supply to modify the host
parameters through the data line connection software.
Flight control trigger mode