4
4.
Place the circuit board back inside the appropriate case half.
5.
Line the two halves up together and snap them shut to form a single device once
again.
Setting Up the Jack Daddy
The following instructions apply whether you are using the Jack Daddy as a standalone device or
in conjunction with a FOXPRO digital game call.
Basic Field Deployment Instructions
1.
Locate the mounting stake on the left side of the housing. The Jack Daddy sits upon
this stake while in use.
2.
Unscrew the mounting stake from the left side housing.
3.
Screw the stake into the mounting point on the bottom of the Jack Daddy.
4.
Locate the decoy topper support rod on the right side of the housing. The rod is
removed by pulling it straight up. Note: there is a plastic decoy support rod alignment
piece that holds the rod in place. You may need to free this piece prior to pulling out
the rod.
5.
Place the bird on the top of the rod by sliding it down and over the tip.
6.
Secure the bottom of the rod to the Jack Daddy by inserting it into the receptacle on
the top of the Jack Daddy and snapping the plastic decoy support rod alignment piece
in place at the base.
7.
Remove the Jack Daddy Remote from the back of the Jack Daddy by pulling it straight
out of its compartment.
Powering On the Jack Daddy
1.
Locate the power switch on the front of the Jack Daddy. Notice that it has 3 positions.
From left to right:
On
,
Off
,
On w/ LED
. The difference between “On” and “On w/ LED”
is that “On w/ LED” results in the LED illuminating when powered on.
2.
Slide the switch into the desired position to turn on the power. If you selected “On w/
LED” you will notice the LED illuminate.
Toggling Decoy Motion
1.
Make sure the Jack Daddy is powered on.
2.
The Jack Daddy Remote features two buttons. The
bottom button
is for toggling the
decoy motion on and off.
3.
To activate decoy motion: push the bottom button a single time. To deactivate: push
the button a second time.
Playing a Sound
1.
Make sure the Jack Daddy is powered on.
Содержание JackDaddy
Страница 1: ......
