5
wire if needed. After the Fox Jack 4 is removed, locate the black plastic battery tray. This tray is
double-sided, providing spaces for 8 ‘AA’ batteries. The tray is connected to a power cable—you
may unplug this cable during battery installation.
2.
Place the batteries into each battery cavity. Be sure to observe polarity as indicated.
3.
Reconnect the power cable (if you unplugged it) and the Fox Jack 4 interface wire (if you
disconnected it). Place the battery tray back inside of the HammerJack.
4.
Secure the Fox Jack 4 back on the HammerJack.
1-4 TX915 Transmitter: First Glance
The following chart corresponds to a graphic depicting the
HammerJack remote. Certain aspects of the HammerJack
remote are marked with a number that corresponds to the
chart defining that particular element.
1-5 TX915 Transmitter: Power Requirements
The HammerJack remote operates on 3 ‘AA’ batteries. It is recommended that you use high-quality lithium
or alkaline batteries for the best performance.
Installing Batteries in the HammerJack Remote
1.
Access the battery compartment by removing the door from the back of the remote. The door
slides down and off of the remote.
2.
Place the batteries into each battery cavity while observing polarity as indicated.
3.
Slide the battery compartment door back on the remote.
2.
Quick Start Guide
The Quick Start Guide gives you a quick rundown on how to get your HammerJack up and running right
away. While this section provides you with the basics to get started, we strongly suggest reading the manual
in its entirety to fully understand all of the features and get the most out of your new product.
1
Power on/off
2
Select
3
Volume up/down
4
Mute
5
Quick access buttons for preset 1 and preset 2
6
Lanyard loop
7
Auxiliary button
8
User button
9
Sound up/down
10
Back/Menu
11
Timer
12
Battery indicator
13
Sound list upload jack
14
Mute status indicator
15
Volume level indicator
16
FOXBANG indicator
Содержание Hammerjack
Страница 1: ......
