15
buttons to cycle through the options. When the desired option has been set, push “Select” a final time to
set it. These settings are remembered between power cycles.
8-16 Remote Settings: Download List
Any time you reprogram the HammerJack 2 to add new sounds or rearrange existing sounds, you must
download a new copy of the play list to the transmitter. This menu item will guide you through that process.
In order to download the playlist, you will need a 3.5mm stereo male-to-male cable (included). See section
10 for more information.
8-17 Remote Settings: Channel
The “Remote Settings: Channel” menu item will allow you to set your HammerJack 2 t
o a desired channel.
This is useful if you are planning on deploying multiple callers in the same vicinity as one another and have
one remote control them individually or all together.
To set the channel, push the “Select” button a single
time, then use
the “Scroll Up” or “Scroll Down” buttons to cycle through the options. The options are C1,
C2, C3, and BC (all). The BC (all) option allows you to control several units simultaneously with one remote.
After you choose the channel you would like to use,
press the “Select” button a final time to lock it in.
Note: Remember to set your caller to the same channel as your remote which is outlined in Section 11.
8-18 Remote Settings: AUX Control
The auxiliary jack operation specifications can be changed from either momentary or latched. All FOXPRO
decoys require that the jack be setup for momentary. To configure the auxiliary jack setting, highlight the
“Aux Control” menu item, push the “Select” button, and then use “Scroll Up” or “Scroll Down” to toggle
the
two options. When the appropriate setting is selected, push the “Select” button to set it. This setting is
remembered between power cycles.
IMPORTANT NOTE
Some third-party decoys may require latched operation as opposed to momentary. A detailed list of
other products and their specific requirements is not maintained by FOXPRO. You will need to check
with the equipment manufacturer to determine if it is compatible and what the requirements are.
8-19 Remote Settings: View
The TX433 can display your sounds either by general numerical listing or by category listing. Sound
categories are the easiest to navigate if you have a large number of sounds. The TX433 supports up to 25
un
ique categories. To configure the view setting, highlight the “View” menu item, push the “Select” button,
and then use the “Scroll Up” or “Scroll Down” buttons to cycle through the options.
When the appropriate
setting is selected, push the “Select” button
to set it. This setting is remembered between power cycles.
8-20 Remote Settings: Sound Numbers
The TX433 displays your sound list in a numerical format based upon the index value of each sound file. The
sounds are numbered from 000
–
399. You can choose to either have the index values visible in your sound
list or you can hide them. The advantage of hiding the numbers is that the sound names might be easier to
read. The options for this setting are “Show” and “Hide.” To toggle the options, highlight “Snd Nums” in the
menu, push the “Select” button, use the “Scroll Up” or “Scroll Down” button to cycle
the options, then push
“Select” to set it. This setting is remembered between power cycles.
8-21 Remote Settings: About Info
The About Info screen displays a variety of information pertaining to version number, number of sounds
loaded, number of favorites, and transmitter health.
Содержание Hammer Jack 2
Страница 1: ......
