26
Caution!
Please verify the sign above the port to ensure using the right port. Connecting to
wrong ports might damage the switch.
Fiber cables should be connected as below:
Step 1: Remove the protective plug from the SFP/XFP fiber transceiver bore; Remove
the protective cap from one end of the fiber cable. Keep the fiber end clean and neat.
Step 2: Attach one end of the fiber cable to the SFP/XFP transceiver, and attach the
other end to the transceiver of the corresponding devices. Note: The SFP/XFP
transceiver‟s TX port should be connected to the RX port of the corresponding device,
and vice versa.
Step 3: Check the fiber port status indicator, a lighted LED indicates that the link has
been established; otherwise the link is not ready and should be examined.
Caution!
Please verify the sign above the port to ensure using the other ports. Connecting to
wrong ports might damage the transceiver or the other ports. When connecting other
devices through a fiber cable to the switch, the output power of the fiber cable must
not exceed the maximum received power of the corresponding modules. Otherwise, it
will damage the switch. Do not stare at the fiber bore when the switch is in operation.
That may hurt your eyes.
2.3.6 Power Supply Connection
S98XX use 220V AC power supply by default. Please read the power input
specification for the detailed information.
AC Power supply connection procedure is described as below:
