Foxfury Lighting Solutions Taker B10, Руководство по эксплуатации продукта

Страница: 9 / 12

9
INSTALLING THE TAKER B10
ONTO A SHIELD
1. Loosen the Thumbscrew until the Clamp is free. Then place the Clamp
anywhere along the edge of the shield (The provided rubber spacer can
also be used if required for a better fit).
2. Then align the Clamp and Thumbscrew to the Picatinny C-Clamp Body
and tighten until the Clamp is locked securley in place.
3. To adjust the angle of the B10, use the provided Hex Key (4mm) to loosen
the Tilt Adjustment Screw (see “Taker B10 Reference Guide” on pg. 3 for
location). Then adjust the angle of the Picatinny Mount to desired position.
Re-tighten the Tilt Adjustment Screw to lock in the angle of Flashlight.
1
2
3
BALLISTIC
SHIELD
Place the shield in
between the battery
compartment and
Light Head. (The
shield pictured is cut
in half for this visual)
FRONT OF SHIELD
CLAMP
PICATINNY
C-CLAMP
THUMBSCREW
SIDE VIEW