Foxfury Lighting Solutions Taker B10 Скачать руководство пользователя страница 10

10

WARRANTY AND OTHER  

INFORMATION

PRODUCT DURABILITY    

                       

Meets NFPA 1971 Guidelines and can 
sustain exposure to 500°F (260°C) for 
30 minutes

CARE/CLEANING

Your FoxFury product is a professional 
tool, but regular maintenance and care 
of your light will maximize performance 
for you. As needed, wash your FoxFury 
product using a soft washcloth, clean 
water and a mild soap. Be sure that the 
flashlight’s Tailcap is SEALED before 
washing. When done, pat dry with a 
damp cloth.

AVAILABLE ACCESSORIES

SideSlide C-Clamp Adaptor 
P/N 85-010

SideSlide Picatinny Adaptor 
P/N 85-012

SideSlide Flashlight ONLY 
P/N 940-012

SideSlide Picatinny Pressure 
Switch Cap, P/N 50-150

WARNINGS

FoxFury, LLC is not responsible for the 
incorrect use of any FoxFury Lighting 
product. 

  Lights are strong enough to    
  cause damage to the human eye. 

 

Do not stare into LEDs for long  

 

periods of time or from a close  

 

range (less than 2 ft).

 

FoxFury, LLC is not responsible  

 

for any injury or damage caused  

 

during the use of this product.

 

Usage of this product must be  

 

supervised by an adult when it is  

 

being used by a minor.

  Any FoxFury product should   
 be operated at speeds safe    
 enough to maneuver around    
 surrounding obstacles.

 

Do not use under the influence  

 

of drugs or alcohol.

LIMITED LIFETIME 

WARRANTY 

FoxFury, LLC (“FoxFury”) warrants 
this product to be free from defects 
in material for a lifetime of use except 
for batteries, LEDs, abuse, and 
normal wear. We will repair or replace 
this product should we determine it 
to be defective. This limited lifetime 
warranty excludes rechargeable 
batteries, chargers, switches, and 
electronics, which have a 2-year 
warranty with proof of purchase.

This limited lifetime warranty is 
given only to the original end user of 
the accompanying product. If you 
purchased a product from someone 
other than an authorized FoxFury 
reseller/distributor or if the product 
was used, (including but not limited 
to demo models, show models or 
refurbished product by someone 
other than FoxFury) prior to your 
purchase, you are not the Original 
Purchaser and the product that you 
purchased is not covered by this 
warranty. This limited warranty is 

IPX7

3 M

1 M

Содержание Taker B10













Отзывы: