LAN-Express IEEE 802.11 Wireless Adapter User Guide
Chapter 5 Troubleshooting
58
Uninstall the card as described in Chapter 2 Installation.
Reinstall the card following the instructions in Chapter 2 Installation.
5-2 Configuring Networking Clients and Protocols
An LAN-Express 802.11 Wireless Adapter will bind to any existing networking
components, such as Client for Microsoft Networks and the Internet Protocol (TCP/IP).
Refer to the steps below that correspond to your computer’s operating system to configure
the card’s networking components.
5-2-1 Windows XP/2000
Follow these steps to configure the card’s networking clients and protocols in a Windows
XP or 2000 computer:
Open the Control Panel’s
Network and Dial-up Connections
(Windows 2000) or
Network Connections
(Windows XP) icon.
Scroll through the list of network connections and right-click the Local Area Connection
that corresponds to the LAN-Express 802.11 Wireless Adapter.
Select
Properties
from the drop-down menu to view the connection’s properties screen.
Select a client or protocol from the list of components and click
Properties
to configure
its settings. For example, if you want to assign the card a static IP address, highlight
Internet Protocol (TCP/IP)
and click
Properties
.
To add a new client or protocol, click
Install...
and follow the on-screen instructions.
