LAN-Express IEEE 802.11 Wireless Adapter User Guide
Chapter 4 Wireless Client Utility Configuration
36
Dynamic Security Authentication Setting
The Dynamic Security setting prevents unauthorized network access; a network RADIUS
server must authenticate each user before the access was granted to the network.
To configure the Dynamic Security settings for a particular profile, select
“WPA”
or
“802.1x”
mode. You can select “TLS” or “PEAP” from the drop-down menu
“WPA EAP
Type”
if you wish to enable the WPA function, or select “TLS”, “PEAP”, or “LEAP” from
the
“802.1x EAP Type”
with no WPA function enabled. The LEAP mode can only been
shown in the
“802.1x EAP Type”
drop-down menu, because the WPA does not apply to the
LEAP function. When selected, click the
Configure
button to configure the settings
described below.
PEAP Mode
Select “
PEAP
” from the drop-down menu under the WPA mode to configure the WPA
authentication for PEAP as shown in Figure 4-13 and Figure 4-14.
Figure 4-13 Dynamic Security with PEAP Authentication
