Serial ATA RAID User’s Guide
<Note>
Source:
The first selected disk.
Target:
The second selected disk.
Create Only:
This operation will destroy all data on all the selected
disks and create a clean mirror array without any data
on it.
Create and Duplicate:
Duplicate operation will reserve data on the
source disk and copy them onto the target
disk.
OK:
Start the operation.
Cancel:
Cancel the operation.
<Disk Copy Remaining Sector>:
Show the remaining copying data.
5. Next, you can click “Cancel” button to leave or click “OK” button to
continue after the operation being selected. The warning messages
will be popup following the differential operations. If the operation is
“Create Only”
, the warning messages are similar to JBOD array
creation.
6. If the operation is
“Create and Duplicate”
, the following warning
message will be popup, seeing below:
37
