Serial ATA RAID User’s Guide
Create RAID
Creating a RAID 0 (Stripe) Array for Performance
NOTE:
SiS964 only supports 2 SATA drivers to create a stripe array.
To create an array for best performance, follow these steps:
1. Press <A> to start creating a RAID array.
2. Press <2> and <Enter> to select RAID 0.
3. You will have two selections to create a RAID 0 array.
The default
value is <1>
. If you select
<1>Auto Create
, you can create a RAID 0
array faster and easier. The Blocksize will be selected by its default
value
“64K”
. The result after auto creating will be shown on
step 6
.
Besides, you also can select
<2>Manual Create
, see following steps.
10
