Foxconn QBOX N270, Руководство пользователя

Страница: 28 / 31

23
Appendix
Install Windows XP in QBOX
By default, the QBOX has been installed Celavie Operating System for you. But if you
do not like the operation system interface, you can install Windows XP by yourself.
What kinds of hardware and software you need here :
1. USB CD-ROM drive.
2. QBOX driver CD.
3. Windows XP Install CD.
Before we continue :
Ŷ 6KXWGRZQ\RXUFRPSXWHU
Ŷ &RQQHFWWKH86%&'520GULYHWRDQ86%SRUWRI4%2;DQGFRQQHFWWKH
power cord to AC power.
Install a New Windows XP
1. Press <DEL> to enter BIOS Setup during POST.
2. Set the “1st Boot Device” to “USB CD-ROM” in "Boot", save changes and exit BIOS.
3. Insert the Windows XP Install CD into the USB CD-ROM drive.
Boot Settings
6SHFL¿HVWKHERRW
sequence from the
Quick Boot [Enabled] available devices.
Quiet Boot [Disabled]
A device enclosed in
Onboard LAN Boot ROM [Disabled] parenthesis has been
disabled in the
Boot Device Priority corresponding type
1st Boot Device [USB:Optiarc DVD RW] menu.
2nd Boot Device [HDD:PM-FUJITSU MHZ]
3rd Boot Device [USB:Generic- SD/MM]
4th Boot Device [Network]
ĸĺ Select Screen
1st Removable Drive [USB:Generic- SD/MM] ĹĻ 6HOHFW,WHP
2nd Removable Drive [USB:Generic- MS/MS] +- Change Field
F1 General Help
1st Hard Disk Drive [HDD:PM-FUJITSU MHZ] F7 Discard Changes
1st CD/DVD Drive [USB: Optiarc DVD RW] F10 Save and Exit
ESC Exit
Y&&RS\ULJKW$PHULFDQ0HJDWUHQGV,QF
Main Advanced Security Boot Exit
Boot
BIOS SETUP UTILITY