3
34
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
► APM Configuration
Press <Enter> to go to its submenu.
APM Configuration
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
APM Configuration
Resume By PS2 keyboard
Help Item
Resume By PS2 Mouse
[Disabled]
Resume On PCI PME#
[Disabled]
Resume On PCIE PME#
[Disabled]
Power On By RTC Alarm
[Disabled]
Disabled
Restore On AC Power Loss
[Power Off] Enabled
Power Button Mode
[On/Off]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F7:Previous Values F8:Fail-Safe Defaults F9:Optimized Defaults
[Disabled]
► Resume By PS2 Keyboard
This item is used to enable/disable the PS2 keyboard to generate a wake up.
► Resume By PS2 Mouse
This item is used to enable/disable the PS2 mouse to generate a wake up.
► Resume On PCI PME#
This item is used to enable/disable a PCI device to generate a wake up.
► Resume On PCIE PME#
This item is used to enable/disable a PCI Express device to generate a wake up.
► Power On by RTC Alarm
This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.
► Restore On AC Power Loss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.
Setting options: [Power Off], [Power On] and [Last State].
► Power Button Mode
This is used to set the system mode when power button is pressed. Setting options: [On/Off]
and [Suspend].
Options
