Chapter 3 BIOS Description
35
v
Soft-Off by PWR-BTTN
This option is used to set the power down method.This function is only valid
for systems using an ATX power supply.
v
Case Open Warning
This option is used to enable or disable case open warning function.
v
Wake- up by PCI card
This item is used to set the system to wake up by PCI card.
v
Power On by Ring
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software.
v
USB KB Wake-Up From S3
This item is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode.
v
Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month) Alarm
W hen the Resume by Alarm set as
“
Enabled
”
, this item will be modified. It is
used to set the timing for the start-up date.
v
Time (hh:mm:ss) Alarm
W hen the Resume by Alarm set as
“
Enabled
”
, this item will be modified. It is
used to set the timing for the start-up time.
v
FDD,COM,LPT Port
W hen this item is enable,the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive,serial ports,or
the parallel port.
v
PCI PIRQ[A-D]#
W hen this item is disabled,any PCI device set as the Master will not power on
the system.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Содержание P9657AB User's
Страница 8: ......
