background image

3

22

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive 

and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change 
the setting.

► System Time

This item allows you to configure the desired time. Use [Enter], [Tab] or [Shift-Tab] to select a 
field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.

► System 

Date

<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read 
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.

► Primary/Secondary/Fifth/Sixth IDE Master/Slave, Third/Fourth IDE Master

While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices. Please refer to mapping table in next page.

► Floppy A

This option allows you to select which kind of the Floppy Disk Drive is installed in your system.

It can be [360KB, 5

1

/

4

"], [1.2MB, 5

1

/

4

"], [720KB, 3

1

/

2

"], [1.44MB, 3

1

/

2

"], [2.88 MB, 3

1

/

2

"] and 

[Disabled].

► Halt On

This category determines whether or not the computer will stop if an error is detected during 
powering up.

[All Errors] : All errors can result in system halt.

[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The 

halt condition can be enabled/disabled in the next three settings.

          CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.

                                                    System Information

  System Time 

[17 : 33 : 49]  

      Help Item

  System Date 

[Tue , 04/29/2008]

       

 

Use [Enter], [Tab]

  ► Primary IDE Master 

[Not Detected]

 

or [Shift-Tab] to

  ► Primary IDE Slave 

[Not Detected] 

select a field.

  ► Secondary IDE Master 

[Not Detected] 

  ► Secondary IDE Slave 

[Not Detected] 

Use [+] or [-] to

  ► Third IDE Master 

[Not Detected] 

configure system time.

  ► Fourth IDE Master 

[Not Detected]

 

  ► Fifth IDE Master 

[Not Detected]

  ► Fifth IDE Slave 

[Not Detected]

  ► Sixth IDE Master 

[Not Detected]

  ► Sixth IDE Slave 

[Not Detected]

  Floppy A 

[1.44 MB 3

1

/

2

"

]

  Halt On

 

[All Errors, But ...]

  Keyboard 

[Disabled]

  Mouse 

[Disabled]

  Floppy 

[Disabled] 

 

       ↑↓←→:Move   Enter:Select    +/-/:Value   F10:Save   ESC:Exit    F1:General Help    

                                           F9:Optimized Defaults

    

17

Содержание P45AL Series











































































Отзывы: