Foxconn nT-i1000 Series Nettop, Руководство пользователя

Страница: 25 / 37

3
20
Boot Options
Version 2.13.1216. Copyright (C) 2002-2011 Foxconn, Inc. 2002-2011 Foxconn, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Power Security BootOptions Save & Exit Advanced Power Security BootOptions Save & Exit
BootOptions
Set Boot Priority
�st Boot [Optical Disk:WD�...]
2nd Boot [Hard Disk]
3rd Boot [Removable]
4th Boot [Network]
▶ Hard Disk Drive BB� Priorities
▶
Optical Disk Drive BB� Priorities
▶ Removable Device BB� Priorities
▶ NETWORK Device BB� Priorities
Quiet Boot [Disabled]
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt
F7:
Load �ser-defined Defaulta
F8: �ave as �ser-defined
F9: Optimized Defaults
(When Access Level is Administator)
F10: Save & Exit
ESC: Exit
Set Boot Priority.
► 1st/2nd/3rd/4th Boot
These items are used to set the system boot order.
► Hard Disk Drives BBS Priorities
Press <Enter> to go to its submenu. This option is used to specify the boot priority sequence
from available hard disk drives.
► Optical Disk Drive BBS Priorities
Press <Enter> to go to its submenu.This option is used to specify the boot priority sequence
from available Optical disk drives.
► Removable Device BBS Priorities
Press <Enter> to go to its submenu.This option is used to specify the boot priority sequence
from available Removable Device.
► NETWORK Device BBS Priorities
Press <Enter> to go to its submenu.This option is used to specify the boot priority sequence
from available NETWORK Device.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal PO�T messages.
[Enabled] : Displays OEM customer logo instead of PO�T messages.