Foxconn nT-i1000 Series Nettop, Руководство пользователя

Страница: 21 / 37

3
16
Power
► ACPI Suspend Mode
This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When you
select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
► Deep Sleep Support
This item is used to enable or disable Deep �leep �upport function.When entering deep sleep
mode system(S4/S5) only can wake up from power button.
ACPI Suspend Mode [S3(STR)]
Deep �leep �upport [Enabled]
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt
F7:
Load �ser-defined Defaulta
F8: �ave as �ser-defined
F9: Optimized Defaults
(When Access Level is Administator)
F10: Save & Exit
ESC: Exit
Select the highest ACPI sleep state the
system will enter when the ���PEND
button is pressed.
Version 2.13.1216. Copyright (C) 2002-2011 Foxconn, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced Power Security BootOptions Save & Exit Main Power