Foxconn M7VMX series Скачать руководство пользователя | Manualshive

Страница: 34 / 107

background image

3

27

CPU Configuration

► Thermal Management

Thermal Monitor 1 (TM1) is implemented in Pentium 4, Xeon and Pentium M processors. It is

a CPU clock modulation mechanism which prevents CPU overheating in emergency cases by

reducing duty cycle of the processor for up to 46%. The task of this mechanism is to maintain

the CPU temperature at maximum safe level by decreasing its performance, or, in terms, by
reducing CPU Load.
Thermal Monitor 2 (TM2) is an advanced mechanism of CPU overheating protection. A
considerable difference is that TM2 can control the frequency and CPU voltage, while TM1
only modulates CPU clock. Due to reduced voltage, TM2 allows to retain better processor
performance in case of overheating at the same reduction of power consumption level.
TM2 is recommended for 2.8 GH� processors and higher (166 MH� bus) and 3.6 GH� and
higher (200 MH� bus), while TM1 is recommended for junior models.
This item will be displayed only when the CPU support this feature.

► EIST Function

This item is used to enable/disable the EIST (Processor Power Management, PPM) feature.

► C1E Function

C1E represents Enhanced HALT State. It is a feature which Intel CPU uses to reduce power
consumption when in halt state. C1E drops the CPU's multiplier and voltage to lower levels
when a

HLT (halt) command is issued. This item is used to enable/disable the C1E support.

Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased average
power consumption and decreased average heat production. There are some system
requirements must be met, including CPU, chipset, motherboard, BIOS and operation
system. Please refer to Intel website for more information.

CA

UT

IO

N

!

Phoenix - AwardBIOS CMOS Setup Utility

CPU Configuration

Thermal Management

[Thermal Monitor 1]

Item Help

EIST Function

[Enabled]

C1E Function

[Auto]

Menu Level ►

Execute Disable Bit

[Enabled]

Vander pool Technology

[Enabled]

Core Multi-Processing

[Enabled]

↑↓→←:Move Enter:/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

←:Move Enter:/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F7:Optimized Defaults

Thermal Monitor 1

«
...
32
33
34
35
36
...
»

Содержание M7VMX series












































































































Отзывы:

Нет отзывов

Похожие инструкции для M7VMX series

Бренд: Gan Systems Страницы: 24

Бренд: Texas Instruments Страницы: 22

Бренд: Supero Страницы: 101

Бренд: IBASE Technology Страницы: 91

Бренд: TYAN Страницы: 164

BOOSTXL-DRV8323Rx

Бренд: Texas Instruments Страницы: 28

Бренд: NXP Semiconductors Страницы: 28

dsPICDEM MCHV-3

Бренд: Microchip Technology Страницы: 68

Бренд: Texas Instruments Страницы: 34

Бренд: ASROCK Страницы: 65

Бренд: Texas Instruments Страницы: 34

Бренд: Aaeon Страницы: 46

Бренд: Aaeon Страницы: 48

Бренд: Aaeon Страницы: 53

Бренд: Aaeon Страницы: 80

ACT2861EVK1-201

Бренд: Active-semi Страницы: 19

SY-P4-645DX DRAGON Ultra

Бренд: SOYO Страницы: 173

RouterBOARD 911 Lite5 ac

Бренд: MikroTik Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды