Foxconn K8S760MG series Скачать руководство пользователя

Страница: 59 / 108

Chapter 3 BIOS Description

SIS USB Controller (Default: Enabled)

This option is used to enable or disable SIS USB controller.

USB 2.0 Supports (Default: Enabled)

This option is used to enable or disable USB 2.0.

USB Keyboard Support (Default: Enabled)

This option is used to set USB keyboard support. The available setting

values are: Disabled and Enabled.

USB Mouse Support (Default: Enabled)

This option is used to set USB mouse support. The available setting values
are: Disabled and Enabled.

SIS AC97 AUDIO (Default: Enabled)

This option is used to enable or disable SIS AC97 audio.

SIS S/W Modem (Default: Enabled)

This option is used to enable or disable S/W modem.

SIS 10/100M ETHERNET (Default: Enabled)

This option is used to enable or disable SiS 10/100 M ethernet.

SiS Serial ATA Controller (Default: Enabled)

This option is used to enable or disable SiS serial ATA controller. The

available setting values are: Disabled and Enabled.

SiS Serial ATA Mode (Default: IDE)

This option is used to set Serial ATA mode. The default is recommended.

The available setting values are: IDE and RAID.

SIS OnChip PCI Device Menu

Ｋ８Ｓ７６０ＭＧ－ＷＩＮＦＡＳＴ－Ｖ１．０　．ｐ６５

2004-9-14, 8:42

Содержание K8S760MG series













































































































Результаты поиска

Содержание K8S760MG series

Отзывы:

Похожие инструкции для K8S760MG series

Бренды по названию

Популярные бренды

Foxconn K8S760MG series, Руководство пользователя

Результаты поиска

Содержание K8S760MG series

Отзывы:

Похожие инструкции для K8S760MG series

Бренды по названию

Популярные бренды