Foxconn K8S755A series Скачать руководство пользователя страница 54

Страница: 54 / 103

Chapter 3 BIOS Description

SIS USB Controller (Default: Enabled)

This option is used to enable or disable SIS USB controller.

USB 2.0 Supports (Default: Enabled)

This option is used to enable or disable USB 2.0.

USB Keyboard Support (Default: Enabled)

This option is used to set USB keyboard support. The available setting values
are: Disabled and Enabled.

USB Mouse Support (Default: Enabled)

This option is used to set USB mouse support. The available setting values
are: Disabled and Enabled.

SIS AC97 AUDIO (Default: Enabled)

This option is used to enable or disable SIS AC97 audio.

SIS S/W Modem (Default: Enabled)

This option is used to enable or disable CNR modem.

SIS Serial ATA Controller (Default: Enabled)

This option is used to enable or disable SIS serial ATA controller. The

available setting values are: Disabled and Enabled.

SIS Serial ATA Mode (Default: IDE)

This option is used to set Serial ATA mode. The default is recommended.

The available setting values are: IDE and RAID.

Lan Controller (Default: Enabled)

The available setting values are: Disabled and Enabled.

SIS OnChip PCI Device Menu

Ｋ８Ｓ７５５Ａ０１－ｍａｎｕａｌ－Ｖ１．１－０７－２２－０４．ｐ６５

2004-9-22, 17:20

Содержание K8S755A series








































































































Результаты поиска

Содержание K8S755A series

Отзывы:

Foxconn K8S755A series, Руководство пользователя, Страница: 54 / 103

Результаты поиска

Содержание K8S755A series

Отзывы: