Foxconn K8S755A series Скачать руководство пользователя страница 13

Страница: 13 / 103

Chapter 1 Product Introduction

K8S755A Series User Manual

ATX 12V connector

This power connector connects the 4-pin 12V plug from the ATX 12V power

supply.

AGP slot

This Accelerated Graphics Port (AGP) slot supports 1.5V AGP8X mode

graphics cards for 3D graphical applications.

CPU socket

A 754-pin surface mount, Zero Insertion Force (ZIF) Socket for the AMD

Athlon64 Processor, Support HyperThansport

Technology with 8/16 links,

up to 1600MT/s bandwidth.

North Bridge controller

The SiS 755 integrates a high performance host interface for the AMD

Athlon64 Processor, and SiS

MuTIOL technology.

DDR DIMM sockets

These three 184-pin DIMM sockets support up to 3GB system memory

using unbuffered non-ECC PC3200/2700/2100 DDR DIMMS.

This 20-pin connector connects to an ATX power supply. The power supply

must have at least 1A on the +5V standby lead (+5VSB).

The ITE8705F controller Super I/O provides support that includes floppy,

serial ports, and parallel port to rest of platform through the SiS

755 and SiS

964 via the Low Pin Count (LPC) interface.

Floppy disk connector

This connector accommodates the provided ribbon cable for the floppy

disk drive. One side of the connector is slotted to prevent incorrect insertion

of the floppy disk cable.

Ｋ８Ｓ７５５Ａ０１－ｍａｎｕａｌ－Ｖ１．１－０７－２２－０４．ｐ６５

2004-9-22, 17:16

Содержание K8S755A series








































































































Результаты поиска

Содержание K8S755A series

Отзывы:

Похожие инструкции для K8S755A series

Бренды по названию

Популярные бренды

Foxconn K8S755A series, Руководство пользователя

Результаты поиска

Содержание K8S755A series

Отзывы:

Похожие инструкции для K8S755A series

Бренды по названию

Популярные бренды