Foxconn IGPSK7MA series Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 63

background image

Chapter 3 BIOS Description

33

MAC Media Interface (Default: MII)

When set as “Auto”, it allows the BIOS to auto-detect the nVIDIA LAN control-

ler and enable it. The setting options are Auto and Disabled.

Machine MAC(NV) Address (Default: Disabled)

This option

MAC(NV) Address Input

When Machine MAC(NV) Address is setting to “Enabled”, you can select the

option and key in MAC address.

IDE HDD Block Mode (Default: Enabled)

This option is used to set whether the IDE HDD Block Mode is allowed. The

available setting values are Disabled and Enabled.

POWER ON Function (Default: BUTTON ONLY)

This option is used to set the power on method for your PC. Setting values

include: Password, Hot KEY, Mouse Move, Mouse Click, Any KEY, BUTTON

ONLY and Keyboard 98.

KB Power ON Password (Default: Enter)

When the POWER ON Function is set to Password, use this item to set the
password.

Hot Key Power ON (Default: Ctrl-F1)

When the POWER ON Function is set to Hot KEY, use this item to set the hot
key combination that turns on the system. The available setting values are:
Ctrl-F1-F12.

Onboard Serial Port 1/2 (Default: 3F8/IRQ4/2F8/IRQ3)

This option is used to assign the I/O address and interrupt request (IRQ)

for the onboard serial port 1/2.

Note: Do not try to set the same values for serial port 1 and 2.

UART Mode Select

(Default: Normal)

Use this option to select the UART mode. The setting values include Normal,
IrDA, ASKIR and SCR. The setting value is determined by the infrared module
installed on the board.

UR2 Duplex Mode (Default: Half)

This option is available when UART 2 mode is set to either ASKIR or IRDA. This
option enables you to determine the infrared (IR) function of the onboard infra-
red chip. The available setting values are: Half and Full.

ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５

2004-11-15, 17:36

33

«
...
38
39
40
41
42
...
»

Содержание IGPSK7MA series
































































Отзывы:

Нет отзывов

Похожие инструкции для IGPSK7MA series

Бренд: Aaeon Страницы: 122

Бренд: Aaeon Страницы: 52

Бренд: Aaeon Страницы: 99

Бренд: Rabbit Страницы: 144

Бренд: MATSONIC Страницы: 76

STM32 Nucleo-32

Бренд: ST Страницы: 37

Бренд: ASROCK Страницы: 160

DLP LightCrafter Display 3310

Бренд: Texas Instruments Страницы: 16

Бренд: Yamaha Страницы: 223

Tiger MPX S2466

Бренд: TYAN Страницы: 1

Бренд: Variscite Страницы: 2

Бренд: JETWAY Страницы: 48

Fatality H97 Killer series

Бренд: ASROCK Страницы: 109

Бренд: Advantech Страницы: 88

Бренд: Microchip Technology Страницы: 54

Бренд: TRU Components Страницы: 4

Бренд: JETWAY Страницы: 55

Бренд: Acorp Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды