Foxconn IGPSK7MA series Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 63

background image

Chapter 2 Installation Instructions

18

Expansion Slots

This motherboard includes three 32-bit Master PCI bus slots and one AGP

slot .

PCI Slots

The expansion cards can be installed in the three PCI slots. When you install or

take out such cards, you must make sure that the power plug has been

pulled out. Please read carefully the instructions provided for such cards, and

install and set the necessary hardware and software for such cards, such as

the jumper or BIOS setup.

AGP Slot

This motherboard has an Accelerated Graphics Port (AGP) slot that only supports

1.5V AGP card. When you use an AGP card, make sure that your AGP card

complies with 1.5V specification. Note the notches on the card golden fingers to

ensure that they fit the AGP slot on your motherboard.

Installing an expansion card

1. Before installing the expansion card, read the documentation that came with

it and make the necessary hardware settings for the card.

2. Make sure to unplug the power cord before adding or removing expansion

cards.

3. Remove the bracket opposite to the slot that you intend to use.

4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

5. Secure the card to the chassis with the screw you removed earlier.

Warning:

The motherboard may be damaged if a 3.3V AGP card is used.

Make sure that your AGP card is 1.5 V specification. Note the

notches on the card golden fingers to ensure that they fit the

AGP slot on your motherboard.

ＩＧＰＳＫ７ＭＡ－ｍａｎｕａｌ－Ｖ１．０－１１－１３－０４．ｐ６５

2004-11-15, 17:36

18

«
...
23
24
25
26
27
...
»

Содержание IGPSK7MA series
































































Отзывы:

Нет отзывов

Похожие инструкции для IGPSK7MA series

Бренд: A-Trend Страницы: 40

Бренд: u-blox Страницы: 2

TPS628436-7-8EVM-167

Бренд: Texas Instruments Страницы: 15

Бренд: WinFast Страницы: 75

Бренд: BCM Страницы: 5

Бренд: Ideal-Standard Страницы: 20

Бренд: BESTEK Страницы: 45

Бренд: Gigabyte Страницы: 80

C807MS-E33 Series

Бренд: MSI Страницы: 124

Бренд: TransCore Страницы: 40

SR1500AL - Server System - 0 MB RAM

Бренд: Intel Страницы: 180

Бренд: Yamaha Страницы: 98

Бренд: Yamaha Страницы: 105

Бренд: ASROCK Страницы: 40

BOXD945GCLL - Socket 775 MicroATX Motherboard

Бренд: Intel Страницы: 90

Бренд: Biostar Страницы: 84

Бренд: Abit Страницы: 80

Бренд: Lex Computech Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды