24
3
Standard CMoS features
This submenu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
►
Date -
<weekday><month><date> <year> format
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use <Enter>, <Tab> keys to select a field. Use <+>, <->, <PageUp> or <PageDown> to select
a value.
► Time -
<hour> : <minute> : <second> format
This item allows you to configure the desired time.
Use <Enter>, <Tab> to move forward and
select a field. Directly input a value or use <PageUp>, <PageDown>, <+> or <-> to select a
value.
► IDE Channel 0/1/2/3
These categories identify the hard disks connected to the PATA and SATA ports in the system.
In each channel’s display, you can press [Enter] to go to its submenu. You can further config
-
ure specific drive settings. [None] and [Auto] settings allow you to enable or disable this drive.
[None] means no HDD is installed or set, and [Auto] means the system can auto-detect the
hard disk when booting up. In Access Mode setting, selections of [CHS], [LBA], [Large] and
[Auto] can help you to select hard drive for legacy compatibility.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Thu,
Jan 10 2008
Item Help
Time (hh:mm:ss)
17 : 44 : 13
Menu Level ►
► IDE Channel 0 Master
[HDS728080PLAT20]
Press [Enter] to enter
► IDE Channel 0 Slave
[DVD-ROM DDU1642]
next page for detail
x IDE Channel 1 Master
None
hard drive settings
x IDE Channel 1 Slave
None
► IDE Channel 2 Master
[ None]
► IDE Channel 2 Slave
[ None]
► IDE Channel 3 Master
[ None]
► IDE Channel 3 Slave
[ None]
Drive A
[1.44M, 3.5 in.]
Halt On
[A
ll , But Keyboard]
Installed Memory
1024M
BIOS ID
G31M04-GA20.F1.P.04
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
HDS728080PLAT20