20
2
Keyboard and Mouse Jumper: Kb/MS_PW
This jumper allows you to enable or disable keyboard and mouse wake-up feature. Set the jumper
to pins 2-3(+5VSB) to wake up the computer from S3 and S4 sleep modes when you press a key
on the keyboard or move the mouse, and a corresponding setting in the BIOS.
When you use the memory which support 1066, the jumpers are used to overclock memory
frequency. At the same time, the overclock bound depend on CPU FSB, you can achieve the
function as below.
1. When the CPU FSB is 1066MHz, set the JP1 pins to 2-3 (as Status 1) , and set “CMOS Setup”
-> “Fox Central Control Unit” ->“DRAM Configuration” -> “DRAM Timing Selectable” to “Manual”,
“System Memory Frequency“ will show 886 and 1066.
2. When the CPU FSB is 1333MHz, set the JP2 pins to 2-3 (as Status 2) , and set “CMOS Setup”
-> “Fox Central Control Unit” ->“DRAM Configuration” -> “DRAM Timing Selectable” to “Manual”,
“System Memory Frequency“ will show 1000.
KB/MS_PW
+5V
(Default)
1
2
3
+5VSB
1
2
3
1
1
JP1
JP2
Default
Status 1
Status 2
1
1
1
1
over Memory frequency Jumper: JP1, JP2
