background image

42

3

PC Health Status

 

 

CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.

PC Health Status

   Warning Temperature 

[Disabled] 

   

Help Item

  Shut Down Temperature 

[Disabled]

  Case Open Warning 

[Disabled] 

 

CPU Temperature  

:63 

o

C/145 

o

F

  System Temperature 

 

:35 

o

C/95 

o

F

 

Disabled

   

CPU Fan Speed 

 

:3729 RPM

 

50 

o

C/122 

o

F

   

System Fan Speed 

:N/A

 

55 

o

C/131 

o

F

   

CPU Core 

:1.232 V

 

60 

o

C/140 

o

F

 

DRAM Voltage 

:1.888 V

 

65 

o

C/149 

o

F

 

+3.3V 

:3.424 V

 

70 

o

C/158 

o

F

 

+12.0V 

:12.032 V

 

75 

o

C/167 

o

F

 

+1.1V 

:1.032 V

 

80 

o

C/176 

o

F

  CPU Smart Fan Function 

[Disabled]

 

85 

o

C/185 

o

F

  System Smart Fan Function 

[Disabled] 

90 

o

C/194 

o

 

 

 ↑↓←→:Move   Enter:Select     +/-/:Value     F10:Save      ESC:Exit     

F1:General Help                       F9:Optimized Defaults

[Disabled]

Options

► Warning Temperature

This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.

► Shut Down Temperature

This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.

► Case Open Warning

This item is used to enable or disable case open warning function.

► CPU/System Temperature

The CPU/System temperature are automatically detected and displayed by the system.

► CPU Fan/System Fan Speed

The CPU fan/System fan speed are automatically detected and displayed by the system.

► CPU Core/DRAM Voltage/NB V 3.3V/+12.0V

/+1.1V

The current voltages are automatically detected and displayed by the system.

► CPU Smart Fan Function / System Smart Fan Function

This option is used to enable or disable smart fan function.

► Start PWM Temperature

It allows you set a temperature value from which smart fan starts its operation.

► Start PWM Value

It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.

► Slope PWM Value

The slope controls the PWM value being stepped up or down versus temperature changes.

Содержание A7GM-S 2.0












































































































Отзывы: