47
Chapter 3 BIOS Description
PnP/PCI Configurations
v
Init Display First
This item is used to set which display device will be used first when your PC
starts up.
v
Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time the machine is turned
on.
v
Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS will automatically
distribute interruption resources. If the ISA cards you installed not supporting
PnP, you will need to select
“
Manual
”
and manually adjust interruption re-
sources in the event of hardware conflicts. However, since this motherboard
has no ISA slot, this option does not apply.
v
IRQ Resources
Press the <Enter> key, then manually set IRQ resources.
v
PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
v
Maximum ASPM support
This item is used to set maximum ASPM for PCI Express device.The unit is
byte.
v
Maximum ASPM sup/payload
This item is used to set maximum payload size for PCI Express device.The
unit is byte.
PnP/PCI Configurations Menu
PDF created with pdfFactory Pro trial version
