Fox MARS, Инструкция по эксплуатации, Страница: 16 / 52

GB
INSTRUCTION MANUAL
10. Switch off the source of supply
a) Once the operation has finished, switch the equipment off with the ON/OFF switch (0/1)
located at the bottom of the body of the equipment and disconnect the power cord from the
source of supply
b) The equipment does not have a memory function, therefore all settings disappear and
are invalid after the power supply is switched off.
CLEANING OF THE EQUIPMENT
1. Before cleaning, unplug the power cable. If the equipment is warm, wait until it has cooled.
2. The unit inside the helmet gets dirty and soils easily, therefore it is necessary to clean it
regularly. Chemicals, such as a hair dye, etc., can cause improper operation.
3. Use a dry and delicate cloth to wipe and clean.
4. If water is sprayed on the control panel, wipe it off immediately with a dry cloth; otherwise,
the water can cause improper equipment operation
Store this Service Manual safely in the vicinity of the product for future use if it is
necessary to check the safety instructions and the important information. The Service
Manual is a part of the product and should not be made available separately.
This symbol means that the product must not be thrown out together with any other house-
hold waste within the territory of European Union. To prevent negative after-effects on the
natural environment and human health that result from improper waste handling, the product
must be utilised in a responsible manner to promote balanced recycling of material resources.
To return the used up equipment, use the return and reception system or contact the shop
where the product was purchased. They can collect the product and transfer it for environmen-
tally safe recycling.
Utilisation in countries beyond the EU
Once the operating period is finished, the equipment must be disposed of in an eco-friendly
manner or utilised according to waste management regulations.
WARNING
In case of failure, you MUST NOT attempt to repair the equipment yourself as it has no parts
designed to be handled by the user.
Return water container (condensing water during
operation)
Check its content after each operational cycle.
Remove water if necessary.
Fig. 7