Fox Live valve, Руководство по настройке

Страница: 6 / 68

6
FORK AND SHOCK COMPRESSION SETTING
CLOSED
(CLOCKWISE)
OPEN
(COUNTER-CLOCKWISE)
18
CLICKS
OUT
LEAST AMOUNT
OF COMPRESSION
DAMPING; SHOCK
COMPRESSION
LIGHTEST
MOST AMOUNT
OF COMPRESSION
DAMPING; SHOCK
COMPRESSION
FIRMEST
SUSPENSION SETUP
The fork and shock on the Live Valve system must be set up
with the system powered off. The next few pages will walk
you through setting your compression, sag, and rebound for
your Live Valve fork and shock.
All Live Valve forks and shocks have a 4 digit ID code. Use
this number on the Help page at www.ridefox.com to find out
more information about your suspension, including travel.
The compression adjuster changes the firmness, or
support, of the fork or shock as it is compressed. The
fork and shock of the Live Valve system have identical
compression adjusters. This compression adjuster
controls both high- and low-speed compression.
Since Live Valve switches automatically between two
compression positions, open and firm, turning the
adjuster bolt changes open mode compression only.
Begin with each compression adjuster in the
SOFT (open) position. Use the included 3 mm
hex wrench to turn the adjuster bolt counter-
clockwise until it stops.
COMPRESSION
ADJUSTER