Fox F36-527, Руководство по сборке и эксплуатации

Страница: 18 / 24

10. Re-fit and re-set the riving knife and the saw blade guard.
11. Before using the saw again, check that all safety devices are in good working order.
IMPORTANT : after replacing the saw blade, make sure the saw blade runs freely by turning the blade by
hand.
12. Plug the machine into a mains socket and run the saw at no load before using it to cut any materials.
Changing the batteries in the laser generator
WARNING : switch off the machine and remove the mains power plug before carrying out any adjustments,
maintenance work or blade changes.
1.
Set the height of the blade to its maximum.
2. Remove the blade guard.
3. Remove the laser assembly cover screw and take out the two button type batteries.
4. Replace both batteries with the same type (or equivalent), taking care to insert them the same way round as the
old batteries.
5. Replace the battery cover and re-attach the laser assembly to the riving knife.
6. Check and, if necessary, adjust the laser line.