Fox F36-075, Руководство по сборке и эксплуатации

Страница: 41 / 50

41
- Actuate the motor with the main switch start button
2
on the handgrip.
- Lower the head and gradually bring the blade into contact with the workpiece.
- Complete cutting and raise the head to its original position.
- Turn off the motor by releasing the main switch button
2 .
WARNING!
If cutting with double inclination (rotation and inclination of the head) keep the workpiece
firmly against the machine with your right hand and lower the head with your left hand
(Fig.11A)
.
USE AS A CIRCULAR SAW (Fig. 12)
WARNING!
When working on the upper table, it is necessary to install the lower protective cap
supplied (Fig. 5 – 6 – 7).
The machine is equipped with a pusher the dimensions and shape of which are in
compliance with the safety standards.
When using the machine as a CIRCULAR SAW (thus using the upper table for the
machine operations), such fitting MUST absolutely be used. Hold pusher from side A
while side B must be put into contact with the piece to be cut as shown in the figure. The
pusher enables to push the workpiece while keeping your hands away from the blade
cutting area.
A
B
Fig.11A