35
The cut-off saw does not start:
- The electric current is missing in the socket to which the supply cable is connected.
- The supply cable is faulty
- The engine is damaged or the carbon brushes must be replaced
- The thermal cut-out has started
Vibrations on the machine
- The disc is not properly fixed
The engine does not work properly:
(excessive heating, exaggerate twinkle of the carbon brushes and consequent noise
accentuation)
- The engine may be damaged: get the machine checked by an electrician
- Carbon brushes must be replaced
All the tools and accessories are made and tested by using the safest and most modern
productive methods. However, if a tool get damaged, it must be repaired by a FEMI authorised
after sales centre.
You can call the phone number 051/6946469 or by sending a request to the e-mail address
[email protected]
MALFUNCTIONS
AFTER-SALES SERVICE
Содержание F20-140
Страница 37: ...37 F20 140 TRONCATRICE A DISCO ABRASIVO CUT OFF SAW...
Страница 39: ...SCHEMA ELETTRICO WIRING DIAGRAM 39...
