24
1.
ALWAYS
disconnect the cut-off saw from the socket before any repair, maintenance
work, cleaning, replacement of the saw blade or any kind of intervention.
2.
DO NOT START
the cut-off saw until it is completely assembled and installed according
to the instructions of this manual, the protection devices are assembled and working, and
the various lock handles are firmly tightened. Be sure that the lock screw of the disc is
firmly tightened.
3.
PLACE
the cut-off saw on a plane and horizontal surface to avoid dangerous oscillations
or movements.
4.
KEEP
your hands away from the disc’s track and area.
5.
CORRECTLY FIX
the workpieces. The workpiece must be straight and properly blocked
to avoid any movement and to prevent the workpiece from jamming at the end of the
cutting.
6.
NEVER CUT
freehand.
7.
BE SURE
that the disc is completely still before removing or fixing the workpiece or
before changing its angle.
8.
ALWAYS CHECK
that the disc is not cracked or damaged before using this tool.
Immediately change the disc if it is cracked or damaged.
9.
ONLY USE
reinforced and recommended abrasive discs.
10.
CHECK
that the speed of the disc you are assembling is bigger than the one of the
machine, only use discs that can bear a speed of 3900 RPM.
11.
CORRECTLY CLEAN
the flanges and the supporting surfaces of the disc before
assembly.
12.
PROPERLY TIGHTEN
the lock screw to prevent the disc from slipping, while being
careful not to damage the disc by deforming the contact surfaces with the flanges.
13.
ONLY USE
disc flanges intended for this tool.
14.
MAKE
the cut-off saw work without cutting after changing the disc to check that it works
correctly.
15.
ALWAYS MAKE
the tool work for about a minute before cutting. If the disc has a crack or
a fault which is not visible, it can break within a minute.
16.
BE SURE
that the abrasive disc is not in contact with the workpiece before starting the
tool.
17.
LET
the motor run at its normal speed before using it.
18.
ALWAYS USE
the protective cap and be sure that it is perfectly efficient.
19.
ALWAYS USE
ear protection devices, protective goggle, the dust mask and protective
shoes.
20.
SLOWLY LOWER
the disc until it come into contact with the workpiece, then lower it
more quickly during cutting. Always keep the disc in contact with the workpiece, in order
to prevent it from becoming oval. If the disc is oval, besides causing mediocre cuts, can
entail dangerous breakings.
21.
LEAN
on supports the ends of big and heavy workpieces, in order to prevent the
workpiece from falling and the risk of injuries.
22.
USE
this tool only for ferrous materials.
DO NOT CUT
wood, aluminium or magnesium.
23.
PLACE
the tool while taking into account the throw of glowing sparks.
24.
REGULARLY CHECK
if the power supply cable is damaged, and if it is the case get it
repaired by an authorised after-sales centre. Regularly check the extension leads and
change them if they are damaged.
25.
IMMEDIATELY STOP
the saw and disconnect it from the power supply if you realize
that any part is damaged or faulty. Get the faulty part changed by an after-sales centre.
Only use spareparts and accessories recommended by us.
SPECIFIC SAFETY INSTRUCTIONS FOR CUT-OFF SAWS
Содержание F20-140
Страница 37: ...37 F20 140 TRONCATRICE A DISCO ABRASIVO CUT OFF SAW...
Страница 39: ...SCHEMA ELETTRICO WIRING DIAGRAM 39...
