17. Reinstall upper control arm to upright
and reattach any wires and brake lines
previously removed from the upright
and upper control arm. Torque to OEM
specifications
18. If equipped with 4x4, reinstall outer
axle into the hub and torque the nut to
OEM specifications.
19. Reinstall the outer tie rod to the
upright and torque the nut to OEM
specifications.
20. On external reservoir models, mount
the reservoir onto the reservoir
bracket on the bottom of the frame
rail, forward the front crossmember.
(Figure 8)
21. You will need to mark the first
mounting hole 7
"
from the
crossmember and
¾"
in towards the
engine. (Figure 9)
22. Using a
7
/
32
"
drill bit, drill a pilot hole
for the first self-tapping screw. Install
one side of the bracket using 1 of the
¼"
self-tapping screws. Once the first
screw is installed, drill a
7
/
32
"
hole using
the second bracket hole as a guide.
(Figure 10)
Figure 9: Passenger side shown
Figure 10: Passenger side shown
Figure 8: Passenger side bracket shown
RIDEFOX.COM 750 VERNON WAY SUITE 101. EL CAJON, CA 92020 USA
6