6. Disconnect the brake line bracket
from the upright. (Figure 2)
7. Disconnect the ABS bracket from the
upright. (Figure 3)
INSTRUCTIONS - FRONT
Medium-strength thread locker (blue) is
recommended on all bolts.
1. Please read the installation guidelines
for instructions on how to properly lift
and secure the vehicle.
2. Record the front vehicle ride height
to ensure proper lift is attained after
kit is installed. You will be able to
make preload adjustments if needed.
(Spanner wrench required) READ
INSTALLATION GUIDELINES ON HOW
TO PROPERLY ADJUST PRELOAD!
3. Remove front wheels from vehicle.
4. If equipped, remove the vehicle skid
plate.
5. Disconnect the sway bar from the
spindle on both sides of the vehicle.
(Figure 1)
Figure 1: Passenger side shown
Figure 2: Passenger side shown
Figure 3: Passenger side shown
1.800.FOX.SHOX (369.7469) 619.768.1800 [email protected]
3