Small Parts Bag
1
Battery tray (3mm balsa/glass)
2
Side rails for battery tray (5mm balsa, milled)
2
Blocks for battery tray, 15 x 10 x 10mm (balsa)
2
Wing servo mounts (6mm composite lite-ply)
1
Motor mount ring Ø 35mm (fibreglass)
1
Canopy Hook (3mm composite lite-ply)
1
Reinforcement for canopy hook (5mm balsa)
1
Fibreglass Strip, 10 x 70mm (canopy rear fixing)
1
Fibreglass Wing joiner, Ø 7mm x 300mm (front wing joiner)
1
Fibreglass Wing joiner, Ø 7mm x 240mm (back wing joiner)
2
Fibreglass rod, Ø 7mm x 85mm (anti-rotation dowels)
1
Fibreglass tube, I.D. 7 x 70mm (to secure battery tray)
2
Allen bolt, M4 x 20mm (wing fixing bolts)
2
Washers for M4 bolts (for above)
2
M3 x 35mm threaded rod (for control horns)
2
Plastic Adapters, M3 (for control horns)
Acknowledgements/Credits:
Fox Composites would like to thank
Overlander Technologies
for their assistance and advice with
regard to the power system for the ‘Komet’, and
Brian Teasdale
for permission to use some of his
excellent photos of the 1st production plane in this Manual.
Fox Composites Co., Ltd.
18
Compiled by Mike Cherry (18 February 2008)
Mac
Milled wood, hardware & small parts included in the kit.
