Four winns 378 VISTA, Руководство пользователя

Страница: 112 / 201

378 Vista™ Owner’s Manual
Section N
Page 3
™
378
Figure N6: Stern Seating
A fill-in cushion is also provided to extend the cushion
area for such things as sunbathing, napping or overnight
sleeping. Refer to Figures N9 and N10.
To install fill-in cushion:
1. From its stored position, loosen screw knob on cou-
pler and retract end from holder and swing the cock-
pit fill-in support away from storage position.
2. Extend the support into the fill-in support block un
der the aft stern seat. Re-tighten screw knob cou-
pler.
3. Undo the velcro strap and place the crutch leg per-
pendicular to the deck for support.
4. Place folded cockpit table/fill-in assembly onto the
17” (short) leg which has already been inserted into
the cockpit table floor mount.
5. Unfold cockpit table using the “dog bone” sliding
supports. Simply slide “dog bone” sliding supports
into support positions.
6. Place fill-in cushions on top of the cockpit table/fill-
in support.
To remove the cockpit fill-in cushion simply reverse the
process described above.
Figure N9: Fill-in Cockpit Cushion
The aft cockpit stern seat uses hydraulic hinges. The
hinged cushion allows the aft cockpit cushion to fold up
against the transom. Access to the engine compart-
ment is possible without the removal of the stern seat
cushion. Refer to Figure N11.
Cockpit Fill-in Support
Figure N7: Stern Seating & Fill-in Support-Stored
Figure N10: Fill-in Support Assembly
Figure N8: Starboard Cockpit Seat Storage