10
2.2 - Footrest unit
2.2.1 - Footrest height and depth adjustment.
The aluminium footrest is height adjustable.
To do this, remove the support fitting screws and position the support at the desired height then replace the
screws. As a guide, good adjustment allows the best possible pressure distribution under the thigh.
2.2.2- Footplate angle
The angle of each footplate is independently adjustable.
To adjust the footplate angle, use the built-in thrust screws.
Note : Footplate are pre-bored for easy setting of calf straps or fixed together into a single footplate. It
exists a special connection to change independent footplates in single footplate. Just ask for it.
Thrust screws
2 : legrest depth adjustment
1 : footrest height