Four-Faith F8 14 Series, Руководство пользователя

Страница: 30 / 49

F8X14 Series User Manual
3.5.4 Scheduled Power On/Off Setting

RTC(Real Time Clock) Time Setting
Click “Set” to ensure the setting
AT Command:
AT+EXCCLK="yyyy/mm/dd,HH:MM:SS",W
For example:
If the current time is at 12:30 on September 1st,2010, Wednesday, the corresponding at
command:
AT+EXCCLK="2010/09/01,12:30:00",3
3.5.5 ZigBee Setting
1
、
It is quite straight-forward to configure your F8X14 devices into a full-mesh-capable device.
You should prepare to setup every node with the following common configurations:
a
、
An identical RF Channel
b
、
An identical MAC Layer Network Identifier (from 0 to 65531, 65535: Random)
2. Now provision a unique MAC Node Identifier into each module. The unique Node Identifier
can be selected from the range of 0 to 65531, 65535: Random . Note that Node 0 in a full mesh
network does not have any supremacy over other nodes any more. A full mesh network can
operate even without Node 0.
3. Turning on devices: For a full mesh network, devices can be turned on at any arbitrary order.
4. Validating connection: you can via any node to start querying the entire crew in the network.