F2X14-E Series IP Modem User manual
Page 21 of 34
Fax
：
0592-5912735
Tel
：
0592-6300320
Xiamen Four-Faith Smart Power Technology Co.,Ltd
.
Add
：
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China
Hotline
：
400-8838-199
SMS activation
:
Open or close SMS activation, in short connection mode, if a DM or
WMMP message is received, the network will be activated
Local data activation
:
Open or close local data activation.(In general, select "Open"),in
short connection mode, if the local serial port has data, the network will be activated.
Timing activation interval (minutes)
:
According to this time, the timer starts when
entering the sleep mode, and when the time is up, the network will be reconnected to realize
the timing activation function. Range : 0 ~ 1440.
Timing offline interval (minutes):
According to this time ,the network will be unblocked
and restarted,value is 0 means the time is infinite .(Generally fill in 0, range: 0~60).
Whether the data flow and business flow are separated
:
Yes.
Note
：
In the state of short connection, open at least one activation mode.
3.2.4 “GPRS dial parameter setting”
GPRS/CDMA dial number
:
A dialing number for accessing a mobile network
Access point name
（
APN
）：
This is required when accessing a mobile network
GPRS/CDMA dial user name
:
A user name is required when dialing into a mobile
network.
GPRS/CDMA dial password
:
A password is required for dial-up access to a mobile
network
PPP heartbeat interval (Seconds)
：
Time interval of heartbeat pack in PPP layer, input
range: 0~9999
Redial interval (seconds)
:
The interval between redialing after PPP disconnection, input
range: 0~3600
Maximum number of redial
:
Restart the system after several consecutive dialing
failures, input range: 0~10
Please refer to local rule of GPRS/CDMA network dial parameters
3.2.5 “Support platform related Settings”
This bar option is only valid if "Whether connect to support platform or not" in "DTU
working mode Settings" is set to "yes"
Support platform equipment number
: Device number identification required in the
WMMP protocol;
Support platform gateway
: Need to fill in the IP address and port number of the
WMMP center;
Support platform connection mode
: Only support UDP;
Support platform heartbeat interval (seconds)
: Heartbeat interval associated with
the WMMP protocol only, range: 4~3600
