Four-Faith Smart Power Technology Co., Ltd.
Email:
Tel: +86-17750019379
Web: www.four-faith.hk
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
outside), and insert card sheath back to the SIM/UIM card outlet.
Warning:
Forbid to install SIM/UIM card when powered!
Installation of antenna:
Screw the SMA male pin of the antenna to the female SMA outlet of the
MODEM tightly. Warning: The antenna must be screwed tightly, or the signal quality
of antenna will be influenced!
Installation of cable:
Insert DB9F end of the RS232 data cable into the DB9M interface of MODEM,
and connect the other end with user’s device.
The signal connection of the RS232 data cable is as follows:
2.4 Power
The power range of the MODEM is 5~35V.
Warning: When we use other power, we should make sure that the power can
supply power above 4W.
We recommend user to use the standard DC 12V/0.5A power adaptor.
2.5 Indicator Lights Introduction
The MODEM provides three indicator lights: “Power”, “ACT”, “Online”.
Indicator
Light
State
Introduction
Power
ON
MODEM is powered on
OFF
MODEM is powered off
ACT
BLINK
Data is communicating
OFF
No data
Online
ON/
BLINK
MODEM has logged on network
OFF
MODEM hasn’t logged on network
DB9F
DB9F
RS232 data cable
1
RXD 2
TXD 3
4
GND 5
6
7
8
9
1
2 RXD
3 TXD
4
5GND
6
7
8
9
