Wiring Guide
The follow wire connection guide should be used for your installation. This guide
shows the most common configurations. Contact Founten for assistance with
configurations not shown on this guide.
Conventional Systems
(Single Transformer)
(Two Transformers)
1 Heat, 1 Cool & Humidity
1 Heat, 1 Cool & Humidity
2 Heat, 1 Cool & Humidity
2 Heat, 1 Cool & Humidity
2 Heat, 2 Cool & Humidity
2 Heat, 2 Cool & Humidity
1 Heat, 2 Cool & Humidity
1 Heat, 2 Cool & Humidity
Heat Pump Systems
1 Heat, 1 Cool & Humidity
1 Heat, 1 Cool, Aux Heat & Humidity
2 Heat, 2 Cool & Humidity
2 Heat, 2 Cool, Aux Heat & Humidity
Humidity Control
The humidity control terminals provide 24VAC 1Amp outputs. Systems which are
controlled by dry contact inputs will require an additional 24VAC relay which is
powered using the humidity control output and Common.
Configuration
All of the thermostat configuration settings can be made through the Founten Site
Manager Web Application. These can be found under the
Admin
section. Each
3
