8
change the setting, and to confirm the change. Always remember to press to save
the change. Otherwise you will lose your new setting.
Parameter
Settings
(
Bold
= default)
Description
Mode
Camera,
Video,
Cam+Video
Select whether still photos or video clips
are taken. In
Video
mode, the
camera can first take photos and then shoot
videos immediately.
Format
Enter
All files will be deleted after formatting the
SD card. Highly recommend you format
the SD card if it has been used previously
in other devices.
Caution: make sure
wanted files on the SD card have been
backed up first!
Photo Size
(affects still
photos only)
3MP, 5MP, 12MP
Select desired resolution for still photos
from 3 to 12 megapixels. Higher resolution
produces better quality photos, but creates
larger files that take more of the SD card
capacity. Besides, larger files require
longer time to write to the SD card, which
will slightly slow the shutter speed.
5MP
is
recommended.
Video Size
(affects video
clips only)
640
×
480
,
320
×
240
Select video resolution (pixels per frame).
Higher resolution produces better quality
videos, but creates larger files that take
more of the SD card capacity.
64
0
×
480
is
VGA mode in standard 4:3 format.
Set Clock
Enter
Press
Enter
to set up date and time.
Picture No.
(affects still
photos only)
01 Photo
, 02 Photos, 03
Photos
Select the number of photos taken in
sequence per trigger in Camera mode.
Please also refer to the
Interval
parameter.
Video Length
(affects video
clips only)
Avi 10 s
, optional from 1s to
60s
Videos are in AVI format that can be
played back on most video players.
Interval
1 Min
, optional from 1S to
60M
Select the shortest length of time that the
camera will wait from when the last picture
was taken and written in the SD card, until
it responds to any new triggers from the
PIR sensor. During the selected interval,
the camera will not take pictures/videos.
This prevents the SD card from filling up
with too many redundant images.
Sense Level
Normal
, High, Low
Select the sensitivity of the PIR sensor. The
High setting suits indoors and
environments with little interference, while
the Normal/Low suits outdoors and
environments with more interference.
Temperature also affects the sensitivity.
The High setting is suitable when the
ambient temperature is warm, and the Low
setting is helpful in cold weather.
Time Stamp
(affects still
photos only)
On, Off
Select
On
if you want the date & time
imprinted in every photo.
Содержание MULTIPIR-12
Страница 1: ...1 MULTIPIR 12 USER MANUAL...
Страница 4: ...4 Figure 1 1 Front View Figure 1 2 Bottom View...
