6
The camera does not come with internal memory. So it will not work without a SD (Secure Digital) memory card or
SDHC (High Capacity) card. Before inserting the SD card into the card slot, please make sure the write-‐protect
switch on the side of the SD card is “off” (NOT in the “Lock” position). The supported memory capacity is up to
16GB. If you use a card capable of above 16GB, make sure you test it before putting the camera in use.
Figure 2.1
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE BEFORE YOU INSTALL OR REMOVE THE BATTERIES OR
THE SD CARD.
CAUTION: ALWAYS SWITCH THE CAMERA TO OFF MODE BEFORE YOU INSTALL OR REMOVE THE
BATTERIES OR THE SD CARD.
2.3 Enter Test Mode
Switch to the
TEST
position to enter the Test mode. In this mode you can take pictures or video clips like a regular digital
camera, or enter the Menu to set up parameters. On the keypad there are four “shortcut” functional keys (see Figure 2-1)
working as below:
Figure 2.2
•
Press the
key to set the camera to shoot video clips.
·
Press the
key to set the camera to take still pictures.
·
Press the
SHOT
key to manually trigger the shutter. A photo or video (depending on the camera setting) will be
taken and saved to the SD card. If the display shows “CARD PROTECTED” when you press the
SHOT
key, switch the
power OFF, remove the SD card and slide its write-protect switch to off.
·
Press the
REPLAY
key to review/playback photos/videos on the LCD screen, or a connected TV monitor. Use
and
key to navigate.
Содержание MULTIPIR-12
Страница 1: ...1 MULTIPIR 12 USER MANUAL...
Страница 4: ...4 Figure 1 1 Front View Figure 1 2 Bottom View...
