TILT
– block or change the movement in the vertical axis.
•
to block press the button (0,5 ),
•
to change the direction hold the button (2 s).
PAN
– block or change the movement in the horizontal axis.
•
to block press the button (0,5 s),
•
to change the direction hold the button (2 s).
RAMP
– 5-step function of inertial speed-up and slow-down of the Head
movement. After turning on the device, second step is default.
•
to increase RAMP level press the button (0,5 s),
•
to decrease RAMP level hold the button (2 s).
The diode blinking speed informs of the current step level.
AUTO-PAN
– the function of automatic panorama movement of the Head.
The direction and speed of the Head turn are regulated with the
SPEED
knobs. Co-works with RAMP level regulation.
In AUTO-PAN mode manual regulation of the camera bend with a joystick.
•
to start hold the button (2 s),
•
to stop press the button (0,5 s).
MODE
– joystick work mode change:
–
linear - the default setting; Head movement is proportional to the
joystick bend,
–
logarithmic – in the most of the joystick range, Head movement is slow
and precise; at the highest point of joystick bent, Head speeds up
considerably.
16
