Start-up, functions
The set is started with the on/off switch. The start-up takes 2 s - this is the
time for the autocalibration of the whole controlling system. Readiness is
announced by blinking RAMP diode (Attention! In case of several diodes
blinking simultaneously, move joystick gently).
Before starting work with the registering device, the functions of the
Controller must be customized. See photo below for explanation:
* memory bank features
15
TILT
PAN
JOYSTICK
Left knob
SPEED
Right knob
SPEED
RAMP
REVERSE ON/OFF*
LOOP ON/OFF*
AUTO-PAN
CANCEL*
MODE
REC*
SAVE*
PLAY*
STOP*
