7
6.
Prepare device for operation
6.1
Mount device on lamp tripod
NOTE:
Please pay attention to the information for use of the tripod manufacturer.
WARNING
Only mount the device to a tripod that is suitable for the weight and dimensions of the device. See
Technichal specifications.
Ensure that the tripod with the mounted device is kept in a tilt- and skid-resistant position.
Open locking lever.
Attach device to tripod with fastener.
Tighten locking lever.
6.2
Insert and remove lamps
WARNING
Danger of cutting and splitting due to breaking or bursting lamps
Do not allow for the lamps to fall. Only touch the lamp at the plastic socket or with a clean cloth or
with clean gloves.
NOTE: Possible discoloration due to burn marks on the lamps
.
Switch off device.
See
Switch device on and off
.
Cut off power supply:
Pull power plug.
Allow for device to cool off.
CAUTION!
Hazard of burning on the lamps. Give the device approx. 30 minutes to cool off.
Insert lamps:
Carefully place lamps into sockets and holding clamps.
WARNING!
Danger of electric shock in lamp sockets. Always screw in all lamps as to avoid
accidentally touching into the sockets.
Removing the lamps:
Pull lamps out of sockets and holding clamps carefully and store securely.
6.3
Connect device to power supply
Switch off device.
See
Switch device on and off
.
Compare the local power network with the connected load of the device.
See
Technical specifications
.
If the values differ, please contact [email protected] or Tel. +49 84 32 / 9489 - 0.
Connect power plug to power outlet.
7.
Operation of the device
WARNING
Please ensure that the lamp tripod with the attached device stands evenly and securely
Holding clamps
