FOTILE JQG7522, Руководство пользователя

Страница: 6 / 37

- 28 - - 29 -
FAQ
Warning: Risk of Electric Shock
• Incorrect repairs are dangerous. Repairs
may only be carried out and damaged power
cables replaced by our authorized service
center, or certified electricians.
• If there is a defect in the product, please
disconnect the power plug or shut off the
power supply of the range-hood socket in
order to avoid electric shock. Please contact
the service center authorized by FOTILE.
• To avoid electric shock, please disconnect the
power plug or shut off the power supply of the
range-hood socket before replacing the LED
light.
• If an abnormal condition occurs during
use, immediately stop using the product and
disconnect the power plug or shut off the power
supply of the range-hood socket in order to
check the following:
Problem/Issue Possible Cause
After the POWER button
is pressed, the range hood
remains off and the button
does not illuminate. The appliance may
be unplugged
The motor works, but the
control panel buttons do
not illuminate. LED lights have
been damaged
If the problem/issue with the appliance still
persists after ruling out the possible cause(s),
SERVICE INFORMATION
Warning
• In the event of an abnormal condition during
the use of the range hood, please stop using it,
disconnect the power plug or shut off the power
supply of the range-hood socket. Please contact
the service center authorized by FOTILE.
• The appliance must only be repaired by
professionally trained and certified technician;
otherwise, severe injuries may occur.The
ventilator shall be not allowed to be repaired
by any party other than Fotile’s appointed
technicians. Otherwise it may cause serious
consequences and exempt the product from
warranty.
• Please do not repair or replace any part of the
Range Hood unless it is specifically suggested
in the manual. All other maintenance work
should be carried out by qualified technicians.
• The following circumstances do not fall into
the scope of free warranty, and a fee will be
charged for repair.
1) Damage resulting from improper handling,
i n s t a l l a t i o n , u s e , m a i n t e n a n c e a n d
safekeeping conducted by customer.
2) Failure and damage caused by using
the product beyond the normal operating
conditions (damage caused in the case that
the voltage is higher than 132V or lower than
104V).
3) The product installed, dismantled or repaired
by customer or any party other than Fotile’s
appointed service staff or agency.
4) Discrepancy between the information on the
purchase voucher and the warranty card and
the product.
5) Product damage caused by force majeure
(such as natural disaster and war, etc.).
6) Product failure or damage arising from use
not in conformity with the “instructions”.
Risk of Electric Shock:
To avoid electric shock, please disconnect the
power plug or shut off the power supply of the
range-hood socket before replacing the LED light.
please contact our authorized service center for
assistance. Preparations before Cleaning:
1.Unplug the range hood or turn off the power
socket.
2. Clear the cookware on the burners.
3. Prepare a neutral detergent and a soft cloth
(or soft brush) for stain removal and cleaning.
Washing and cleaning the surface, Grease
Cup, and grease filter:
(The cleaning can be done by the user)
1.Clean the surface of the hood and the back of
the smoke baffle plate.
2. Take out the oil cup horizontally and wash it.
Warning: For the safety of you and your family,
please regularly clean out the oil in the oil cup and
sediment on the external surface of the oil cup
to avoid fire risk. Please operate with protective
gloves.
3.Hold the two sides of the grease filter and pull
sideward to unlock it.
★
Suggestion: In order to protect the health of
you and your family, the filter should be cleaned
regularly and it is dishwasher safe for your
convenience.
Warning: Please wear the qualified protective
gloves in operation.
Replacing LED Lights:
1.Unplug the range hood or turn off the power
socket.
2. Use a small flat-head screwdriver to gently
pry the LED assembly out.
3. Disconnect the wires and then replace the
LED lights.