132
Save/Load of Song data (VF80EX)
<Hint>
To play back a desired loaded track on the current drive, carry out the following operation depending
on the load type.
• To play back a track loaded with the type set to "One":
1.
Select the appropriate program to which the track to be played back is loaded by following the
procedure below. (See "
Selecting a program
" on page 62 for details about how to select a
program.)
1-1.
Press the
[TRACK EDIT/PGM]
key while holding down the
[SHIFT]
key.
1-2.
Use the
[JOG]
dial (or the
[CURSOR
/
]
keys) to highlight the appropriate program.
1-3.
Press the
[ENTER/YES]
key.
2.
Press the
[PLAY]
key to start playback of the track.
• To play back tracks loaded with the type set to "Select" or "All":
1.
Select the destination program by following the same procedure as step 1 above.
2.
Select a desired track in the program by using the
[LOCATE |
]
or
[LOCATE
|]
key while the
recorder is stopped or during playback.
Because all the tracks loaded take part in the same program, you have to select a track within
the program.
The VF80EX automatically set a mark at the beginning of each track loaded with the type set to
"
Select
" or "
All
", so pressing
[LOCATE |
]
or
[LOCATE
|]
key locates to the beginning of the
previous or next track, as with a typical CD player on the market (see "
Mark function
" on page
32 for details).
3.
Press the
[PLAY]
key to start playback of the track.
To check marks, press the
[SCENE SEQ./MAP]
key while holding down the
[SHIFT]
key while the recorder
is stopped. The display shows the mark map, allowing you to check the mark positions (in the screen
example below, the time base is set to "
Bar/Beat/Clk
").
