Once the studio monitors have been placed in their final location, it is time to proceed to connecting your
be made using XLR or TRS connectors. The gain control on the back of the monitor allows continuously
variable adjustments to match most input types from -10dBV to +4dBu. The input is electronically balanced
and is compatible with unbalanced sources, although this may require an adapter. The connection of the
PM-2 MK
Ⅱ
to the console/digital workstation should be done in the following order.
Setup Instructions
continued
Step 1: Make sure that all equipment has been powered down.
Step 2: Confirm that all gain controls, on the monitor and the source, are set to the minimum setting.
Step 3: Connect the source to the PM-2 MK
Ⅱ
monitor.
Step 4: Power up the all source equipment and then turn on the PM-2 MK
Ⅱ
last.
Step 5: Set the gain of both monitors at medium setting and slowly bring up the gain of the console.
Step 6: Adjust the gain of both monitors for balance and for best signal to noise ratio
Once the above steps have been completed, you are ready to use your PM-2 MK
Ⅱ
monitors. It is
recommended that you now play some familiar audio material and make any final adjustments, as far
as placement or level, to get the optimum performance in your monitoring environment.
p-5
PM-2 MK
Ⅱ
studio monitors to the mixing console or digital workstation. Connection to the PM-2 MK
Ⅱ
can
